Hello, We moved to "the middle of the stick" remote location away from help and supplies. We bought Hayward system and cell, lots of salt and a water testing kit in Houston and shipped this over in a container... So new pool made to dodgy standards but seems to work. But now with water (from a dedicated well) and salt in the system and the Hayward system running and hooked up to the T-15 cell and flowmeter, I get the following: Power LED on green, Generating LED first on now off, Check salt LED on, Check Cell LED on. Ph was perfect and now8.2 ish. They do have chemicals here but only for conventional pools. Questions.
1) What is the Hayward system really telling me?
2) What does inspect cell mean? (I had a good look.... looks fine but who am I? what do I need to look for - looks clean and not broken)
3) Can I use alternative as stabiliser as noone has Cyanuric acid unless combined with Chlorine in powder form.
4) If the Generating LED is off and the Superchlorinate LED is on while superchlorinating is it generating chlorine or not?
Many thanks for any help - can't say I find the Hayward manual particularly informative either for installation or use... but perhaps that is my ignorance?!
Regards, Floor
1) What is the Hayward system really telling me?
2) What does inspect cell mean? (I had a good look.... looks fine but who am I? what do I need to look for - looks clean and not broken)
3) Can I use alternative as stabiliser as noone has Cyanuric acid unless combined with Chlorine in powder form.
4) If the Generating LED is off and the Superchlorinate LED is on while superchlorinating is it generating chlorine or not?
Many thanks for any help - can't say I find the Hayward manual particularly informative either for installation or use... but perhaps that is my ignorance?!
Regards, Floor