We have an autopilot sc-36, almost 3 years old. Past couple days we have been getting the check/clean cell warning. Cell has been cleaned, looks great...salt is at 3200ppm...3.2 amps.
If we take off the tri-connector at the cell and reconnect the error goes away for a couple hours then comes back. Does this sound like a cell problem or a connector problem. Right now we have no free chlorine in the pool, 4 days ago all water levels were perfect.
If we take off the tri-connector at the cell and reconnect the error goes away for a couple hours then comes back. Does this sound like a cell problem or a connector problem. Right now we have no free chlorine in the pool, 4 days ago all water levels were perfect.