Based on input in the Pump area of the forum it was suggested to me to go with a larger Sand filter and better pump for my 27' Round AGP (52" deep)
2" PVC has been laid down and buried each line is about 50 feet long with 4 90 degree elbows.
It was suggested to use a 1HP 2 speed pump and 300lb sand filter. I am concerned that the 1HP will be strong enough for the distance I need to cover which is why I posted the 1.5 HP model. If that is overkill please lmk. FYI I do plan on installing a Compuplus SWG for the pool as well.
Would this setup be a good choice. I can get both sent to me next day for about $600 total if I order by 12 noon EST. I could save a few dollars by waiting but my install was supposed to start tomorrow.
Please advise.
Thanks
Greg
2" PVC has been laid down and buried each line is about 50 feet long with 4 90 degree elbows.
It was suggested to use a 1HP 2 speed pump and 300lb sand filter. I am concerned that the 1HP will be strong enough for the distance I need to cover which is why I posted the 1.5 HP model. If that is overkill please lmk. FYI I do plan on installing a Compuplus SWG for the pool as well.
Would this setup be a good choice. I can get both sent to me next day for about $600 total if I order by 12 noon EST. I could save a few dollars by waiting but my install was supposed to start tomorrow.
Please advise.
Thanks
Greg