hi
I have an A.O. smith motor on a Sta Rite Max E Glass II pump. The pool wasn't opened last summer.
So the pump was last operated 18 months ago. It was drained at that time.
2 years ago the pump was re- built . It was blowing fuses 2 secs after start-up.
Now when I flip the switch - nothing - no hum.
I even checked the fuses with a multi meter. They are fine.
I tapped the housing at start-up too.
I'll take the motor back to the shop .
Suggestions ?
TIA
David - Brampton
near Toronto CANADA
I have an A.O. smith motor on a Sta Rite Max E Glass II pump. The pool wasn't opened last summer.
So the pump was last operated 18 months ago. It was drained at that time.
2 years ago the pump was re- built . It was blowing fuses 2 secs after start-up.
Now when I flip the switch - nothing - no hum.
I even checked the fuses with a multi meter. They are fine.
I tapped the housing at start-up too.
I'll take the motor back to the shop .
Suggestions ?
TIA
David - Brampton
near Toronto CANADA