How much automation can I get out of the solar control from the easy touch 8 control box? I have install the solar sensor and Actuator for the diverter valve. doesn't seem to do much. except i can push the solar button and the actuator valve moves. I could have did that by hand.
Solar is enable
Start- 3 degrees
Run - 2 degrees.
I set the pool to heat only by solar to 80 degrees
Are there other setting to configure?
I would love it if Solar would turn off when I heat the spa with Gas heater. Since Solar water run is quite a long run and reduce some water pressure.
I would love it more if the intelliflo can run at high speed for a2 min before going back to lower speed for solar heating to prime the pipes.
Solar is enable
Start- 3 degrees
Run - 2 degrees.
I set the pool to heat only by solar to 80 degrees
Are there other setting to configure?
I would love it if Solar would turn off when I heat the spa with Gas heater. Since Solar water run is quite a long run and reduce some water pressure.
I would love it more if the intelliflo can run at high speed for a2 min before going back to lower speed for solar heating to prime the pipes.