I have pics and descriptions. My pump is pumping.... and it seems fine. But there are a couple leaks, and I'm not a fan of the hoses.
You can see the one hose, from the pump to the filter is sagging. They are 3' hoses. What would work better?
The return into the pool has a crack. Could I caulk that somehow? Or do I have to replace it? Can I do anything without the need to lower the water level?
There is water dripping from the discharge port of the multiflow valve. I had accidentally started the pump while it was in between Filter and Waste, so I think the dripping might be residual from that. Did I damage it?
The plumbing was originally done for a pump with a side port in. I twisted the shutoff valve at the angle it is now, to get the pump closer to the filter.
What would you do?
You can see the one hose, from the pump to the filter is sagging. They are 3' hoses. What would work better?
The return into the pool has a crack. Could I caulk that somehow? Or do I have to replace it? Can I do anything without the need to lower the water level?
There is water dripping from the discharge port of the multiflow valve. I had accidentally started the pump while it was in between Filter and Waste, so I think the dripping might be residual from that. Did I damage it?
The plumbing was originally done for a pump with a side port in. I twisted the shutoff valve at the angle it is now, to get the pump closer to the filter.
What would you do?