- Aug 25, 2008
- 72
Not sure if this the right location for this or not, but hoepfully someone can help me. I have a GoldLine Controls Pro-Logic control system for my pool/spa. About 6 months ago, the valve acuator for the pool/spa suction quit activating when the unit was placed in Spa mode. Essentially this placed the unit in "Spa Spillover" mode. I thought the actuator was defective and went and pruchased a new one, however the new one did not function either. So I started experimenting and found that actuator would work prperly if I plugged it into the "return" spot instead of the "suction" spot.
So I was able to determine that for whatever reason the suction actuator is not being activated by the control module. I am hoping that someone with some knowledge of the control systems can help me either A. figure out what is wring with the suction relay/control, or B. reprogram the unit to activate optional vave 3 when the pool is placed into Spa mode, so as that would solve the problem too.
Any help would be greatly appreciated.
Thanks,
Bryan
So I was able to determine that for whatever reason the suction actuator is not being activated by the control module. I am hoping that someone with some knowledge of the control systems can help me either A. figure out what is wring with the suction relay/control, or B. reprogram the unit to activate optional vave 3 when the pool is placed into Spa mode, so as that would solve the problem too.
Any help would be greatly appreciated.
Thanks,
Bryan