Hi everyone. I've finally got my new (to me) pool water balanced and I've experimented with pump run times and it looks like I need about a 5 hour run time to keep the water nice and clear. My equipment includes 2 pumps, one for the pool, and another for the spill-over spa. There is a 2-circuit Intermatic timer that controls both pumps at the same time. I don't want to run the spa pump all the time, due to the increase in alkalinity the spillover causes, plus the increased electric use. I tried shutting off the breaker for the spa pump and leaving the pool pump breaker on, but it looks like they wired the power for the timer clock to come from the spa pump circuit Should I just switch the wiring inside the timer so the clock gets power from the pool pump circuit and use the breaker to control the spa pump, or should I completely remove the spa pump from the timer and hook up a 240v switch to run the spa?