ok last year had a heck of a time keeping the water clear and the SWG working. Most times it said that we needed to add salt. So I would clean the fins with acid and it would work for a day. Then started to get algae blooms (I believe black and mustard) dumped a lot of chemicals in it to clear it up and fortunately it got cold so I didn't have to mess with it.
This year I have a new outlook on the pool and want to make it easier on me. We just had the water tested and this is what we have going on.
FAC = 0
TAC = 0
Salt = 3200 good
CYA = 25 low
TA = 140 ok but on the high side
pH = 8.0 high
Acid demand = 5
Phosphates = 200 it says ok on the chart but the tech said that is high
OK so what do I need to do to get it inline and actually have my SWG actually work?
This year I have a new outlook on the pool and want to make it easier on me. We just had the water tested and this is what we have going on.
FAC = 0
TAC = 0
Salt = 3200 good
CYA = 25 low
TA = 140 ok but on the high side
pH = 8.0 high
Acid demand = 5
Phosphates = 200 it says ok on the chart but the tech said that is high
OK so what do I need to do to get it inline and actually have my SWG actually work?