Hayward H400IDL2 Heater

[Bill D.]

Hi, I hope this is the correct thread for this question (didn't see the exact category).

Does anyone have experience with replacing the Combustion Blower on one of these units? After troubleshooting I'm 99% sure it's the problem but would like to bounce what I've done off of someone with experience. Also, gaining access to the blower doesn't seem obvious and I can't find any instructional Youtube videos out there. Thanks.

-Bill

 

[eric99gt]

Replaced mine some time back. Don't remember all the details. Some info below.

https://www.troublefreepool.com/threads/92076-Hayward-H400IDL2-Heater-AO-Code-bad-blower?p=1363930#post1363930

 

[danpik]

The induced draft blower is under the top sheet metal cover.

Dan

 

[Sitkom]

Yes, and the cover pops off with a little grunt at each corner/side.