I just installed a new spa pack in my indoor spa. I am running a 120v system with one two-speed pump and no other accessories. Upon firing up the new system for the first time I realized that the pump speeds are reversed in order when I press the pump button on the spa-side controls...when I push it once the high speed pump comes on, twice turns on low speed, three turns off pump. It should be 1=low 2=high 3=off according to the spa pack manual.
This would not be that big of a deal however my heater only turns on when the pump is running at high speed and will not turn on when it is in low speed. Since I am running a 120v system it should be reversed, the heater should only run with the pump in low speed to prevent overload.
I have checked the low level programming and all of the jumpers appear to be in the right position for my configuration. Please advise, thank you.
This would not be that big of a deal however my heater only turns on when the pump is running at high speed and will not turn on when it is in low speed. Since I am running a 120v system it should be reversed, the heater should only run with the pump in low speed to prevent overload.
I have checked the low level programming and all of the jumpers appear to be in the right position for my configuration. Please advise, thank you.