- Jan 21, 2009
- 562
- Pool Size
- 21000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
It is supppose to get down to 13 in Nashville tomorrow night. So that means probably 10 in my neck of the woods. This is the only night it's suppose to be that cold. Not long term.
I have a non insulated 9x12 building around all my pool equipment. I've blown out my deck jet lines. My freeze protection is set to kick pump on at 34 degrees. I have the valve to my booster pump open also. This will allow water to flow through it without it actually being on. Will that be o.k. or should I put a heater in my building??? I don't have electricity in it yet, but I could run a 50' extension cord to it if necessary.
Do I need to put a jug in my skimmer?? If so, do I partially fill it with antifreeze and do I leave the top off the jug??? I've read about people doing this but wasn't really sure how to do it.
Thanks for any advice.
I have a non insulated 9x12 building around all my pool equipment. I've blown out my deck jet lines. My freeze protection is set to kick pump on at 34 degrees. I have the valve to my booster pump open also. This will allow water to flow through it without it actually being on. Will that be o.k. or should I put a heater in my building??? I don't have electricity in it yet, but I could run a 50' extension cord to it if necessary.
Do I need to put a jug in my skimmer?? If so, do I partially fill it with antifreeze and do I leave the top off the jug??? I've read about people doing this but wasn't really sure how to do it.
Thanks for any advice.