Hi all. Went away for a week and pool was great. Came back, went out there this am to check on things and I have a problem.
I look at my Aqua Rite display, it reads 3300 PPM salt, Temp is 85, displays what the % output is set at and then nothing. No power LED, no salt generation, etc... I turned off the power and then back on, the no flow light came on and then off as it should, then generation light came on for about 10 seconds and then went off. At no time was the Power LED on. I took off the cover and checked the fuse, it's okay. The unit is exactly 5 years old and I changed out the cell this summer.
Any thoughts before I call the service guy?
I look at my Aqua Rite display, it reads 3300 PPM salt, Temp is 85, displays what the % output is set at and then nothing. No power LED, no salt generation, etc... I turned off the power and then back on, the no flow light came on and then off as it should, then generation light came on for about 10 seconds and then went off. At no time was the Power LED on. I took off the cover and checked the fuse, it's okay. The unit is exactly 5 years old and I changed out the cell this summer.
Any thoughts before I call the service guy?