- Jan 21, 2009
- 562
- Pool Size
- 21000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
The only thing I'm really worried about not being below the freeze line is the deck jets. Now, does this sound doable????
Turn off the valves to all my deck jets.
Remove the jet thingys at the concrete surface which will expose the pipe coming to my jets. Stick a hose of some kind down in there and syphon out the water and pour antifreeze down in the pipes.
I'm not really worried about the return and skimmer lines cause they are below the freeze line. If it got really,really cold I could just run my pump.
I'm going to put insulation in my pool house. Barring an electrical outage, I should be o.k. with the pipes coming out of the ground in it. As I said, I could always use a 20G propane tank to heat it if need be.
Turn off the valves to all my deck jets.
Remove the jet thingys at the concrete surface which will expose the pipe coming to my jets. Stick a hose of some kind down in there and syphon out the water and pour antifreeze down in the pipes.
I'm not really worried about the return and skimmer lines cause they are below the freeze line. If it got really,really cold I could just run my pump.
I'm going to put insulation in my pool house. Barring an electrical outage, I should be o.k. with the pipes coming out of the ground in it. As I said, I could always use a 20G propane tank to heat it if need be.