Began setting this pool up about 2 weeks ago, yard seems fairly level. Had water delivered and realized it is not level in one area. How far can it be off and still be safe in a pool this large. It holds 22,900 gallons.
30’ Round Revel above ground pool, by swim and play.
- Thread starter Jerryhall
- Start date
- Jun 22, 2014
- 47,798
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Hello and welcome to the forum! 
We generally advise owners to ensure their pool is within 1 inch level. Hopefully your pool isn't too far off. Thanks for using the forum.
We generally advise owners to ensure their pool is within 1 inch level. Hopefully your pool isn't too far off. Thanks for using the forum.It is two of the posts on the one side and they are out of level about 2 inches. The bottom of the pool seems fine. Do you think I could possibly dig carefully under the legs and let the legs settle lower? I cant imagine draining 22,900 gallons of water that cost us tons of money, but I also want a safe pool.
Let the pool settle a couple under the weight of the water for a couple of days, then check for level again. Does the pool lean at all or is one area just a little lower? If you could post a couple of pictures of the pool and the water level inside the pool that would be helpful.