I recently tried to turn my pool lights on after about 2 years of not using them. They are the Fiberstars 6004 series and are connected to a Intermatic tomer. I fixed the problem with the timer not working, but when ever i turn the unit on the GFI trips. I am only getting 25 volts at the input to the color wheel assembly. Is this correct, it does leave the timer at 120. I have tried playing with the togle switches and if the unit is off the GFi won't trip but as soon as its turned on the gfi trips. Do do have to replace the bulb as it was cracked, but even with the bulb out the gfi will trip. Any Help or suggestions are greatly appreciated.