Here are my numbers:
CYA 45
FC 0
PH - see below
TA 60
The pressure gauge on my filter is high and staying in the 25-30 range, even during and after backwashes. Could this be due to the heavy algae? My pool is thick green, can barely see the top step. I also just opened the pool to start filtering. All valves are open and plugs removed from supply jets.
PH is high, so I think I need to take care of this before slamming, right? I've never needed to adjust the PH so advice would be helpful. It took 5 drops of R-0005 to adjust the sample to 7.2 where I think it should be.
CYA 45
FC 0
PH - see below
TA 60
The pressure gauge on my filter is high and staying in the 25-30 range, even during and after backwashes. Could this be due to the heavy algae? My pool is thick green, can barely see the top step. I also just opened the pool to start filtering. All valves are open and plugs removed from supply jets.
PH is high, so I think I need to take care of this before slamming, right? I've never needed to adjust the PH so advice would be helpful. It took 5 drops of R-0005 to adjust the sample to 7.2 where I think it should be.