- Jan 7, 2008
- 173
As mentioned in a previous post, I was questioning the CL output of my Autopilot. We purposely bought an oversized unit so the cell would not have to work as hard and we would get some extra life out of it. Since I changed the power cell to level 3 on Saturday, my CL is still not increasing as much as I feel it should with a SC60. Last year, I had the power cell on 2 and it worked great. Since the cell is almost 1 year old, I would like to get this covered under warranty, if there is an issue.
Autopilot SWG DG220 - SC60
My #'s are as follows
CL...yesterday am was 2.5 and this morning it is only 3.0 (that is with power cell 3, at 100% with the pump on for 9 hours)
Ph......7.6
TA.....90
CH.....180 (roughly)
CYA....60
Salt......4800
Strainer is clean and there does not appear to be any scaling that we can see. Anything else that should be checked?
Thx for any help.
Autopilot SWG DG220 - SC60
My #'s are as follows
CL...yesterday am was 2.5 and this morning it is only 3.0 (that is with power cell 3, at 100% with the pump on for 9 hours)
Ph......7.6
TA.....90
CH.....180 (roughly)
CYA....60
Salt......4800
Strainer is clean and there does not appear to be any scaling that we can see. Anything else that should be checked?
Thx for any help.