Need help with installing a Pentair PL4 controller

[tenndoc]

Sorry! Been so busy with everything else I haven't been able to get back to finishing the install. Hopefully things will be better this week.

20x40 IG, Hayward maxflo vs, tagelus t60 sand filter, Taylor test kit, diy solar panels for heating pool water, full size solar blanket to keep the heat we get and of course -
'More fun than you can shake a stick at'

 

[tenndoc]

Found the required location of the water temp sensor. Thanks.


20x40 IG, Hayward maxflo vs, tagelus t60 sand filter, Taylor test kit, diy solar panels for heating pool water, full size solar blanket to keep the heat we get and of course -
'More fun than you can shake a stick at'

 

[tenndoc]

Just to update - I've finished the controller part of the install and everything is working as planned! Schedule is going well and the controller turns the pump off during TVA's high rate hours and back on after That'll save $$$ right there! :BigSmile:
Now, about the actuator - guess that should be a separate thread.

As always, thanks for all the help, you guys are great!


44,000 gal. IG, Hayward Maxflo vs, Tagelus T60 sand filter, Taylor test kit 2006C, diy solar panels for heating pool water, full size solar blanket to keep the heat we get and installing a Pentair Easy Touch 4 & the Pentair IC60 swcg

 

[tenndoc]

Hey all - happy to report that the IC60 is plumbed in and all connected. We are now generating Chlorine and everything appears to be working as advertised.
Thanks again for all your help.


44,000 gal. IG, Hayward Maxflo vs, Tagelus T60 sand filter, Taylor test kit 2006C, diy solar panels for heating pool water, full size solar blanket to keep the heat we get and installing a Pentair Easy Touch 4 & the Pentair IC60 swcg