- Jan 21, 2009
- 562
- Pool Size
- 21000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite Pro (T-15)
I've been shocking my pool since Friday. Shock target is 20.
Stuff I've added:
6lbs CYA should get me to 50. Can't test till Sat.
Salt test today 2200(adding more tonght) SWG never been on.
I tested FC with strips this evening and it was a little above 10(should have more DPD tomorrow )
Checked pH today while FC was 11-12 and it was 6.8
Before starting the shock mode, my water was
TA 60 (has not been adjusted)
CH 80 (has not been adjusted)
pH 9 (dropped on it's own)
Is there anything else I should/could be adding at this time????? I realize TA is a little low and CH is way low. pH is low if this is accurate.
I need guidance
Stuff I've added:
6lbs CYA should get me to 50. Can't test till Sat.
Salt test today 2200(adding more tonght) SWG never been on.
I tested FC with strips this evening and it was a little above 10(should have more DPD tomorrow )
Checked pH today while FC was 11-12 and it was 6.8
Before starting the shock mode, my water was
TA 60 (has not been adjusted)
CH 80 (has not been adjusted)
pH 9 (dropped on it's own)
Is there anything else I should/could be adding at this time????? I realize TA is a little low and CH is way low. pH is low if this is accurate.
I need guidance