The main problem is that I have a spa that is dirty and seems to be growing algae periodically. I'm curious as to what settings are recommended to turn the water over in the spa? Some details: Spa has a spillover feature into the pool, has an air bubble feature, and also has its own separate jets. There is a floor return but I think it's only used when I manually move a lever near the main pump (I messed with that once and it basically sucks out all the water in the spa until it's dry).
Right now, I have my pool set to clean for approx 8 hours, 6 of those hours are the Caretaker system. What setting, and how much time, should I use for the spa? Do I turn on the spillover for 30 minutes every night? Do I turn on the jets and air first to move the particles around? Or should this be every other day? Should I be concerned about turning the water over so it's properly chlorinated and clean?
I can set this up via my Aqualink PDA. Thanks for any guidance.
Right now, I have my pool set to clean for approx 8 hours, 6 of those hours are the Caretaker system. What setting, and how much time, should I use for the spa? Do I turn on the spillover for 30 minutes every night? Do I turn on the jets and air first to move the particles around? Or should this be every other day? Should I be concerned about turning the water over so it's properly chlorinated and clean?
I can set this up via my Aqualink PDA. Thanks for any guidance.