Hi, I am new to the forum and a new pool owner. I am making the switch from Baq to BBB. I don't have a test kit yet, but below are the water test results I got from a pool store.
TC -
FC -
Ph - 8.0 1-drop
T Alkalinity - 80
T Hardness 250
Cyanuric Acid - 0
Biguanide - 15
I found the guide at pool-school/baqua_chlorine_conversion. So I start by bringing the PH within levels? I'm not sure what the 1-drop means on the test and I didn't think to ask while I was at the store. They did not give a reading on the TC or FC.
I looked at the calculator and it showed add 28 oz of muriatic acid to get the PH from 8.0 to 7.2. It also showed to add 311 oz of 6% bleach to bring the FC from 0 to 15. Am I going in the right direction?
Thanks for the help,
Tim
TC -
FC -
Ph - 8.0 1-drop
T Alkalinity - 80
T Hardness 250
Cyanuric Acid - 0
Biguanide - 15
I found the guide at pool-school/baqua_chlorine_conversion. So I start by bringing the PH within levels? I'm not sure what the 1-drop means on the test and I didn't think to ask while I was at the store. They did not give a reading on the TC or FC.
I looked at the calculator and it showed add 28 oz of muriatic acid to get the PH from 8.0 to 7.2. It also showed to add 311 oz of 6% bleach to bring the FC from 0 to 15. Am I going in the right direction?
Thanks for the help,
Tim