- Sep 17, 2016
- 188
- Pool Size
- 16500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
OK, need to input. 5 out of the five times I have backwashed my filter, the push/pull valve has developed a small leak at the top around base of the handle. Each time, the PB has sent the warranty people out to repair it. Not sure what was done the first two times (replaced O rings?) but it fixed the leak. They last time, They replaced the valve and stopped the leak.
A few days ago, I backwashed and then took the filter apart and cleaned the grids. After putting it back together, I now have another leak at the base of the push/pull handle!!! Each time prior to engaging the handle to open the valve to backwash, I have made certain the pump as been off.
I can't imagine what is causing a leak to start ALMOST EACH AND EVERY TIME! Any ideas?
Sent from my iPad using Tapatalk
A few days ago, I backwashed and then took the filter apart and cleaned the grids. After putting it back together, I now have another leak at the base of the push/pull handle!!! Each time prior to engaging the handle to open the valve to backwash, I have made certain the pump as been off.
I can't imagine what is causing a leak to start ALMOST EACH AND EVERY TIME! Any ideas?
Sent from my iPad using Tapatalk