I just installed My SWG and followed the manufacturers recommendation on how much salt to add. My documents say my pool is 22,300 gallons and the chart had me put in 587 LBs of salt to reach 3400 PPM (since I had no salt in it at all) and I'm now getting readings of 5500 PPM! I put in 15 bags of 40 Lbs of the recommended blue bag from Home Depot coarse solar salt. thats...600 LBs (only 13 LBs over). If I calculate my gallons based on my dimensions: 18x36xAvg depth of 5.5 feet x 7.5 gives my pool 26K gallons, so I couldn't of underestimated, if anything I should be short. Its only been a few days now...Do I have to dilute? Also, the AWG control reads 4400 PPM and the "accuecheck" strips read 5500 PPM.
Thanks in advance for any advise!
B
Thanks in advance for any advise!
B