Have a Goldline Controls Aqua RITE Pro and it keeps telling me no power to cell. I'm pretty sure it's the circuit board from what I've read however I can't seem to find or figure out the Model number. There are several G1- numbers on the board and box but none seem to work as far as relating to anything. Also read on here wear someone actually repaired the board by jumping with a wire around the bad spot but can't seem to find that again. Any help would be awesome, just trying not to order the wrong parts. Thanks!!
Aqua RITE Pro problems.
- Thread starter Duke Zorn
- Start date
- May 3, 2007
- 17,013
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
Usually it is the thermistor on the Aquarite boards. Have you ever soldered before? It is a pretty easy fix.
I believe the pro board is GLX-PCB-AR-PRO.
This might be useful: Aquarite Hayward No Cell Power.wmv - YouTube
I believe the pro board is GLX-PCB-AR-PRO.
This might be useful: Aquarite Hayward No Cell Power.wmv - YouTube
GLX-PCB-AR-PRO is the right board. Here is a link to the manual for units built after 2008 http://www.hayward-pool.com/pdf/manuals/AquaRiteProOct08&later.pdf The manual for before 2008 http://www.hayward-pool.com/pdf/manuals/AquaRiteProPriorOct08.pdf