I'm currently building a new pool that will be using Pentair Intellibrite 5G LED pool lights. The pool and paver deck will have a full screen enclosure around it. I'm interested in tying in lighting for my future landscaping that will be around the outside of the enclosure but I wont be doing the landscaping until a while after the pool is completed. I'll be controlling the pool lights from the Intellibrite controller (no automation system in my set up). It's my understanding that the Intellibrite controller can also sync and control the Intellibrite landscape lights along with the pool lights. Since I haven't designed the exact landscape layout yet I don't want to pre place the lights at this point. Does anyone know how difficult it would be to have the electrician run the wiring around the outside of the enclosure while he's doing the other electric for the pool so that I could come back later myself and add a number of the Intellibrite landscape lights after I get the landscape design done? Do these lights simply daisy chain from one to the other on a single wire or would they need individual home runs back to the controller for each light? Any advice is appreciated if you have experience with these lights.