Hi all,
Received my new Taylor 2006C kit today with the magna stir and set about testing. The kit and instructions are fairly straightforward so no trouble getting some readings.
This is what I got:
FC - 1.6
PH - 7.4
TA - 90
CH - 190
CYA - 45
Salt - 4800
Temp- 29deg C (84deg F)
The pool is new fibreglass in ground and obviously salt. It's controlled by a SWG and is mostly covered with a 800 micron PE cover to retain the heat so the heat pump doesn't work over time.
I haven't figured out the SWG as yet. I have the ORP set at 550 but it doesn't seem to be increasing the FC. Yesterday the FC was measured at 3 so it has dropped. The wife and 4 kids were in the pool last night. A friend has exactly the same hardware set up and his ORP is set at 520 and gives him consistent FC's of 3 - 4.
Interesting in comments.
Thanks in advance
Received my new Taylor 2006C kit today with the magna stir and set about testing. The kit and instructions are fairly straightforward so no trouble getting some readings.
This is what I got:
FC - 1.6
PH - 7.4
TA - 90
CH - 190
CYA - 45
Salt - 4800
Temp- 29deg C (84deg F)
The pool is new fibreglass in ground and obviously salt. It's controlled by a SWG and is mostly covered with a 800 micron PE cover to retain the heat so the heat pump doesn't work over time.
I haven't figured out the SWG as yet. I have the ORP set at 550 but it doesn't seem to be increasing the FC. Yesterday the FC was measured at 3 so it has dropped. The wife and 4 kids were in the pool last night. A friend has exactly the same hardware set up and his ORP is set at 520 and gives him consistent FC's of 3 - 4.
Interesting in comments.
Thanks in advance