So I don't have a pool builder with the fancy design software that I see on this site. All I got is my rudimentary Microsoft Paint skills. So here it is!
- My first question is about the placement of lights. I was thinking along the side closest to house - so it's not shining toward deck / patio. But I also considered one at each end (facing each other). My concern is the shadow that will be created by the bench in shallow end. THOUGHT ON THIS???
More pictures of the yard are below.
Location - Pittsburgh, Pennsylvania
18' x 36' vinyl
vinyl over steps
9' benches coming off 2nd step
corner bench in deep end
wedge design (no flat in deep end) - this minimizes the slope angle
2 LED light - (see my question below)
2" piping
Cartrige filter
Electric heat pump
4 deck jets - all individually valved at pump
colored concrete border
cantilevered edge
colored concrete patio
pavers for firepit
pavers for steps going up to driveway
X-treme slide (not xtreme 2) - this is what builder included
3 gates in fencing
- My first question is about the placement of lights. I was thinking along the side closest to house - so it's not shining toward deck / patio. But I also considered one at each end (facing each other). My concern is the shadow that will be created by the bench in shallow end. THOUGHT ON THIS???
More pictures of the yard are below.
Location - Pittsburgh, Pennsylvania
18' x 36' vinyl
vinyl over steps
9' benches coming off 2nd step
corner bench in deep end
wedge design (no flat in deep end) - this minimizes the slope angle
2 LED light - (see my question below)
2" piping
Cartrige filter
Electric heat pump
4 deck jets - all individually valved at pump
colored concrete border
cantilevered edge
colored concrete patio
pavers for firepit
pavers for steps going up to driveway
X-treme slide (not xtreme 2) - this is what builder included
3 gates in fencing