we just got our SWG connected today. yesterday we added 9 40lb bags salt. that was under what the pool calculator told me to add for 3000ppm. we let the pump run yesterday and shut it off. i turned it on again this morning and it has run all day until late this afternoon when we got the electrical connected.
when we turn it on, it looks like its reporting 2600 ppm salt. it then shuts down and gives a high reading with the red light. what is going on? i hate to drain water. could my pool actually have too much salt?
we have it set for "t-15" which is the correct cell type.
my pool is 16,900 gallon gunite
todays readings(this morning):
FC-5
Ph-7.5
TA-80
CH-226
CYA-70
when we turn it on, it looks like its reporting 2600 ppm salt. it then shuts down and gives a high reading with the red light. what is going on? i hate to drain water. could my pool actually have too much salt?
we have it set for "t-15" which is the correct cell type.
my pool is 16,900 gallon gunite
todays readings(this morning):
FC-5
Ph-7.5
TA-80
CH-226
CYA-70