Just had AutoPilot SWG installed on my new pool. PB installed while I was on vacation, he checked and verified all was working afterward. When I returned from vacation I saw the display had "Boost On". Thinking the PB had set it to help raise chlorine level I checked the chlorine level and it was very high (registered 20 with Taylor kit). Talked with PB, thought it was odd that "Boost" was on and just asked that I turn it off. I checked hours later and "Boost" mode was on again. I turned it off and well, you get it, Boost mode was on again. Unit powered off for the night and this morning "Boost" was on again. Called PB and he said he's never seen this before. They contacted manufacturer who suggested that button may be pressed (internally) or maybe a bad board. Whatever it is they PB said they will be out to fix it. I'm just curious if anyone has seen this occur with their AutoPilot SWG unit and if so what was cause or fix.
UPDATE: Problem was never determined, unit was swapped out with Hayward Aqua Rite (see post #13 below).
UPDATE: Problem was never determined, unit was swapped out with Hayward Aqua Rite (see post #13 below).