Need help adding Boric Acid

LittleTagAlong

0
Bronze Supporter
Jun 17, 2016
137
Amarillo TX
Even after leaving pool unattended for 8 days, my levels are great. Now I want to add Borates in the form of powdered Boric Acid. Pool Calculator tells me how much but not how. Do I need to lower my TA a bit more? It's steady at 80.
This morning: CYA 80, pH 7.6, FC 9 (dropping from SLAM) CC 0, TA 80, CH 175 :)
And I see how to do it with Borax and MA, but not Boric Acid. Please advise.
Thanks
 
Are you using Pool Math or poolcalculator.com?

Please be careful with poolcalculator and only use Pool Math as linked through from TFP. They look the same but I don't think the calculation from poolcalculator.com are correct.
 
I only use poolcalculator because I paid for it. Tonight's readings: pH 7.6 FC 6.5 (SWG goes on tomorrow) CC 0.0, TA 70(endpoint 80), CH 175. Didnt test salt or CYA.
So can SWG run while I add Boric Acid??

Sent from my 6045O using Tapatalk
 
Fine to run swg and cleaner. No need to clean the filter. I'm pretty sure that Pool calculator is not updated anymore. PoolMath in TFP is kept current.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.