I have been trying to get the pool clean and running the last two weeks. Gave the pool a good scrub a couple times and the auto cleaner has been doing it's job. The pool looked great when I opened it, not much to clean out. I started out by shocking it and getting the salt water generator running.
Here are my readings
FC=4
TC=4
CC=0
PH=7.5
TA=130 (same as what comes out of my tap water, tried lowering before but when I put water in it slowly goes right back to 130 range)
CYA=50
CH=110
Salt=3400
This is my 3rd season with the pool and everything above seems to be ok so I am a little confused as to why the cloudy water in the deep end. Shallow end looks clear. Sand filter is reading about 15psi and has been back flushed several times.
Any suggestions would be appreciated.
Here are my readings
FC=4
TC=4
CC=0
PH=7.5
TA=130 (same as what comes out of my tap water, tried lowering before but when I put water in it slowly goes right back to 130 range)
CYA=50
CH=110
Salt=3400
This is my 3rd season with the pool and everything above seems to be ok so I am a little confused as to why the cloudy water in the deep end. Shallow end looks clear. Sand filter is reading about 15psi and has been back flushed several times.
Any suggestions would be appreciated.