from what I have seen you just cap the ends and one end use a union connected to a pressure gauge and take everything to I think 25 PSI.. I have seen someone post a kit before that they used...
from what I have seen you just cap the ends and one end use a union connected to a pressure gauge and take everything to I think 25 PSI.. I have seen someone post a kit before that they used...
So I used a tubeless stem in a cap and sealed off other ends. Pumped with air from compressor and brought it to 20 lbs. (checked with tire gauge). Checked about an hour later still at 20 lbs. a coupling is cheap compared to some of the stuff needed in that video. I have a 2" and a 1 1/2 that's on a male threaded for my jets. Problem solved
from what I have seen you just cap the ends and one end use a union connected to a pressure gauge and take everything to I think 25 PSI.. I have seen someone post a kit before that they used...
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!