I have recently cleaned my filters, all my chem levels are great and in the range recommended. Yet it seems that after about 3-4 days there is a little brownish/greenish buildup in the surfaces of the pool. So I've been brushing the pool 1-2 times a week. I guess my question is am I missing something? It seems that brushing 1-2 times a week is more then I expected....or is this pretty standard?
What might be helpful as well is that my pool has these little popup heads that are jets and they rotate and kick up whatever is on the bottom of the pool in the shallow and deep end. So when my pump is running it determines how hard the jets go, for example when I set the pump speed to 4 the jets are working strong, when the pump is on speed 1 the jets are weaker.... So I'm guessing that instead of a pool sweeper the previous owner had these installed to kick up and clean off the surface of the pool and then it get's filtered via the pool filter. Does anyone have this setup? Any recommendations on how to use this right and dial it in good I would love your input!
What might be helpful as well is that my pool has these little popup heads that are jets and they rotate and kick up whatever is on the bottom of the pool in the shallow and deep end. So when my pump is running it determines how hard the jets go, for example when I set the pump speed to 4 the jets are working strong, when the pump is on speed 1 the jets are weaker.... So I'm guessing that instead of a pool sweeper the previous owner had these installed to kick up and clean off the surface of the pool and then it get's filtered via the pool filter. Does anyone have this setup? Any recommendations on how to use this right and dial it in good I would love your input!