I had the Start-Up of my pool yesterday.
PB showed me how to clean my cartridge filter.
Gauge showed 10 lbs. and was told to clean when it showed 20 lbs.
This was on the highest speed 4 of my VS pump.
When I set the speed to lowest speed 1 it reads barely above 0. and speed 2 is 3 lbs speed 3 is 6 lbs
Which speed do I use to keep track of this or doesn't it matter as long as when it reads 10 lbs higher it's time to clean the filter.
Note: I plan on using the lowest speed I can which right now dafaults at speed 1 = 750 rpm @ 43 watts. The settings for each speed can be adjusted.
PB showed me how to clean my cartridge filter.
Gauge showed 10 lbs. and was told to clean when it showed 20 lbs.
This was on the highest speed 4 of my VS pump.
When I set the speed to lowest speed 1 it reads barely above 0. and speed 2 is 3 lbs speed 3 is 6 lbs
Which speed do I use to keep track of this or doesn't it matter as long as when it reads 10 lbs higher it's time to clean the filter.
Note: I plan on using the lowest speed I can which right now dafaults at speed 1 = 750 rpm @ 43 watts. The settings for each speed can be adjusted.