Using PoolMath (link at the top of the forum), enter your pool's gallons, at the bottom the pool's finish type (vinyl, plaster, etc), chlorine type (we're hoping you'll use bleach/liquid chlorine) and select the TroubleFreePool method.
Then enter 0 for FC (I'm going to guess if you've filled it and it's been a few hours, it's pretty much 0), and 2 for your target FC. PoolMath will tell you how much bleach to add (don't forget to set bleach strength right there).
The order of adjustments for you right now is:
Chlorine
Stabilizer (same time, get CYA in as soon as possible) - PoolMath will tell you how much stabilizer to add as well - your target is 30 and current is 0.
Ph
TA will be adjusted as you make Ph corrections (unless it's lower than 30, in which case let us know and we can talk).