We are trying to figure out how to turn in the spillway with the control panel. We can manage it manually, but I'm not sure what we should do otherwise.
On our aqualink rs board, the labeled buttons are filter pump, cleaner, jet pump, and air blower. The pool light, spa light, slide, and aux 7. From what I've read, aux 3 (air blower) would normally be the one used for spillway.
People before us may have messed with switches. When we started everything up, pool mode and spa mode were reversed. We flipped a toggle on the back of the auction side actuator, and that seemed to fix it. The other two actuators (return side - one is for spa or pool return, the other for slide, we think) were in manual mode.
Any suggestions to point us in the right direction?
On our aqualink rs board, the labeled buttons are filter pump, cleaner, jet pump, and air blower. The pool light, spa light, slide, and aux 7. From what I've read, aux 3 (air blower) would normally be the one used for spillway.
People before us may have messed with switches. When we started everything up, pool mode and spa mode were reversed. We flipped a toggle on the back of the auction side actuator, and that seemed to fix it. The other two actuators (return side - one is for spa or pool return, the other for slide, we think) were in manual mode.
Any suggestions to point us in the right direction?