Hey everyone. I have a 24' AGP and I'm in the process of converting from filter to sand. One of the members here recommended a 300lb Hayward sand filter (S244) along with a Hayward (SP1592) 1hp 2 speed pump if I chose to replace my Proline 1.5hp 2 speed pump. On eBay I found both Hayward products from "saveonpoolsupplies" and the total is about $500. I messaged them to see if they had a one auction combo with both of the products and they mentioned that the pump I was looking at is AG while the filter is IG and they are mismatched. Is this correct and if so is it a problem? If it is what other pump and filter should I be looking at?
***My pump and filter will be approx 15' away from my pool, so about 30' of piping to and from. I plan to plumb in 1.5" pvc piping below the frost line.
-Judd
***My pump and filter will be approx 15' away from my pool, so about 30' of piping to and from. I plan to plumb in 1.5" pvc piping below the frost line.
-Judd