hello everyone, I've been a long time looker on the site for little issues that I've had with the pool and also learning from you all. ok, here's my issue. I have a 2 speed flotec pump 230v and Monday the pump got loud while on high speed. The pump goto turned off untill I got home to look at it. so I get home flip the switch on the timer to on and the motor turned but was loud and shut off after about 3 seconds. I then opened the back and noticed my start capacitor had a Crack about 3/8" long. I tried to turn it on again (high) and noticed it was spinning backwards. after a few seconds it shut off by itself. I then turned it to low speed and it spun in the right direction. I checked my power and was getting 240vac. so I reached the start capacitor and still the same symptom. the motor is not froze up and still spins freely. please if you have any information about what I could troubleshoot next, it would be great. oh, by the wayear, I've cleaned and Removed and reinstalled this thing 5 different times in the last 4 days. I'm on witts end. thanks everyone