New 27' round AGP with salt generator installed in April. All of April and May the pool was crystal clear with temps in the 70s and low 80s and had to turn down my SWG to 20% because my CL levels were over 10. Family got in the pool for extended periods of time this weekend for the first time, followed by several days of mid 90s. Came home today to a green pool. My initial levels as follows:
FC 0.5
CC ? 0-0.5
PH 7.5
TA 100
CYA 65
Added 112oz of 10% liquid chlorine (all that I had) and vacuumed the bottom as much as I could until it got dark out. Left pump and sand filter running on high speed.
Recheck Cl levels:
FC 7
CC 0-0.5
My question is, do I need to SLAM the pool or will a sufficient chlorine level along with filtering clear it up? It is going to be close to 100 this weekend and would like to be able to safely use it. What should I do? Is it safe to get in the pool to vacuum easier? At what chlorine level should I not get in?
Thanks a lot!
FC 0.5
CC ? 0-0.5
PH 7.5
TA 100
CYA 65
Added 112oz of 10% liquid chlorine (all that I had) and vacuumed the bottom as much as I could until it got dark out. Left pump and sand filter running on high speed.
Recheck Cl levels:
FC 7
CC 0-0.5
My question is, do I need to SLAM the pool or will a sufficient chlorine level along with filtering clear it up? It is going to be close to 100 this weekend and would like to be able to safely use it. What should I do? Is it safe to get in the pool to vacuum easier? At what chlorine level should I not get in?
Thanks a lot!