My pool light went out a few weeks ago. After pulling it out, I determined that it is Hayward ColorLogic 2.5 (which is now discontinued). As per Hayward's Tech Support's suggestion, I bought the Universal ColorLogic (LPCUS11050) because it can be programmed to "appear" as the old ColorLogic 2.5.
I have followed the instructions in the user manual, which says "Turn on lights, then off for 11-15 seconds (repeat 3 times)" to enter the programming mode. I cannot get the LED to enter the programming mode.
Am I missing something? :-?
I have not hooked up the light to my controller yet. It is simply connected to an outlet on the wall for now.
Has anyone actually tried this? Is there a trick to it?
I have followed the instructions in the user manual, which says "Turn on lights, then off for 11-15 seconds (repeat 3 times)" to enter the programming mode. I cannot get the LED to enter the programming mode.
Am I missing something? :-?
I have not hooked up the light to my controller yet. It is simply connected to an outlet on the wall for now.
Has anyone actually tried this? Is there a trick to it?