I recently had a 24' round AGP installed. It was previously installed so I don't have any paper work on the filter or pump.
The brand of the pump is a Pentair. There's also a sticker on it that says Turboking.
I can't find any pumps on their web site that matches the description of mine.
It says model: 227T on one sticker. On another where Pentair is listed it shows P/N: 7 193742-02
amps 8/16
Another sticker says 2.0 HP
Does anyone have a suggestion on the detailed specs and guide on maintenance, etc. of this pump?
It is hooked to a sand filter. I do not see anything on the filter itself telling me what brand it is.
It has a large lever on the top of the filter for various functions such as filter, waste, recirculate, and a couple of others I can't remember right now.
A couple of times the pump has stopped 'pumping' but the power was on and could hear it running. I moved the lever to a couple of different positions and when I moved it to waste and then back to circulate it start pumping again, but shot some sand into the pool. The guy that installed it said to never do that with the pump on he was supposed to come back and give me some instruction on it but it's been a week and I need to try and get this figured out. He did an incredible job on the install. You can hardly tell the pool was used previously. It has a hang-on liner, everything is excellent condition and he used a laser many times during the install to ensure it was level and the water level is absolutely perfectly level.
So he knows how to install a pool but just not a good teacher LOL
The brand of the pump is a Pentair. There's also a sticker on it that says Turboking.
I can't find any pumps on their web site that matches the description of mine.
It says model: 227T on one sticker. On another where Pentair is listed it shows P/N: 7 193742-02
amps 8/16
Another sticker says 2.0 HP
Does anyone have a suggestion on the detailed specs and guide on maintenance, etc. of this pump?
It is hooked to a sand filter. I do not see anything on the filter itself telling me what brand it is.
It has a large lever on the top of the filter for various functions such as filter, waste, recirculate, and a couple of others I can't remember right now.
A couple of times the pump has stopped 'pumping' but the power was on and could hear it running. I moved the lever to a couple of different positions and when I moved it to waste and then back to circulate it start pumping again, but shot some sand into the pool. The guy that installed it said to never do that with the pump on he was supposed to come back and give me some instruction on it but it's been a week and I need to try and get this figured out. He did an incredible job on the install. You can hardly tell the pool was used previously. It has a hang-on liner, everything is excellent condition and he used a laser many times during the install to ensure it was level and the water level is absolutely perfectly level.
So he knows how to install a pool but just not a good teacher LOL