Good afternoon all! Pool company just finished new build last week. It was filled last Tuesday and the equipment including SWG was up and running Thursday evening. They said let the equipment run 24 hours and bring in a water sample, which I did. There results were;
FC: 1.79
TC:1.79
PH: 7.2
Alkalinity: 49
CYA: 2
Phosphates: 2500
Salt 3650
Of course they sold me Phosfree (which I have not yet added) and baking soda (added 12#) before I read through Pool School. I just received my TF100 today and tested the water. My results were;
FC: 1
TC: 1
PH: 8.2
CH: 200
TA: 140
CYA: undetectable
ironically, the SWG check system light came on over the weekend and the system is reading 2500 ppm for salt. I used the pool school calculator and know I need a lot and soon before It turns green What particular order should I add what's need and prioritize. Thanks for your help?
FC: 1.79
TC:1.79
PH: 7.2
Alkalinity: 49
CYA: 2
Phosphates: 2500
Salt 3650
Of course they sold me Phosfree (which I have not yet added) and baking soda (added 12#) before I read through Pool School. I just received my TF100 today and tested the water. My results were;
FC: 1
TC: 1
PH: 8.2
CH: 200
TA: 140
CYA: undetectable
ironically, the SWG check system light came on over the weekend and the system is reading 2500 ppm for salt. I used the pool school calculator and know I need a lot and soon before It turns green What particular order should I add what's need and prioritize. Thanks for your help?