I bought the Digital 220 with a SC-48 cell. This is a big cell compared to my small pool, but I wanted to oversize the cell. At the same time as installing the AutoPilot I replaced my two Intermatic timers with a singel Intermatic P1353 timer. This new one is much nicer and gives me all the flexibility I need for my two speed pump and booster pump. It appears I may have to put my two timers in the buy/sell area to see if someone else could use them.
The install went very smoothly, I did notice that the paper template to mark the holes to be drilled did not match the holes of my AutoPilot, but I was able to bend the edges out enough to get them to fit. Maybe this is normal?
I'll post some before after picture a little later when I get them downloaded and all.
I do have a couple questions for the experts out there on what power level and such I should set it on. I will be running the SWG 12 hours per day which 1.5 turn overs per day. I currently have it set at default setting, which is power level 1, 66% . I have been using 174 oz of 6% bleach per day for the last few weeks. I figure that comes to ~10.44oz of chlorine. Will my current cell settings work for this?
Secondly, how do I get a good salt reading? Since running it I have checked the salt level 3 times and got in order, 3300, 2900, 4400. Not sure which to believe.
thanks,
dave
The install went very smoothly, I did notice that the paper template to mark the holes to be drilled did not match the holes of my AutoPilot, but I was able to bend the edges out enough to get them to fit. Maybe this is normal?
I'll post some before after picture a little later when I get them downloaded and all.
I do have a couple questions for the experts out there on what power level and such I should set it on. I will be running the SWG 12 hours per day which 1.5 turn overs per day. I currently have it set at default setting, which is power level 1, 66% . I have been using 174 oz of 6% bleach per day for the last few weeks. I figure that comes to ~10.44oz of chlorine. Will my current cell settings work for this?
Secondly, how do I get a good salt reading? Since running it I have checked the salt level 3 times and got in order, 3300, 2900, 4400. Not sure which to believe.
thanks,
dave