Hi all,
i am am new to this site and am so glad I found it. I have a 38,000 gallon in ground pool with a sand filter , vinyl liner, and salt generator. When I opened it it was green, it is now cloudy and the stores tell me I have a chlorine block, high copper and low alkalinity. These are my most recent water test results:
free chlorine .23ppm
tot. Chlorine. 2.12
combined chlorine 1.89
ph. 6.3
hardnesd 47
alkalinity 9
cyn acid 54
copper 1
iron .3
phophate 320
i was told to add 60lbs of alkalinity, mineral stain out and non-chlorine shock. I would greatly appreciate
any advice. Thank you!!
i am am new to this site and am so glad I found it. I have a 38,000 gallon in ground pool with a sand filter , vinyl liner, and salt generator. When I opened it it was green, it is now cloudy and the stores tell me I have a chlorine block, high copper and low alkalinity. These are my most recent water test results:
free chlorine .23ppm
tot. Chlorine. 2.12
combined chlorine 1.89
ph. 6.3
hardnesd 47
alkalinity 9
cyn acid 54
copper 1
iron .3
phophate 320
i was told to add 60lbs of alkalinity, mineral stain out and non-chlorine shock. I would greatly appreciate
any advice. Thank you!!