New pool owner. I had the liner changed and switch to SWCG in March. So it was an early opening. I have been taking a water sample to my local pool store, but then I found TFP and purchased a TF-100 and K1766. Today I made my first test and hopefully I did things correctly. It rained last night so I did not do the test until about 13:30 so the water would be mixed, the pump starts at 11:00 and stops at 20:00. The SWCG is set to 45% and the water is crystal clear. We have not been in the water yet because it has only been about 80 the days we could have gotten in. Water temp today at time of test was about 77.
FC = 10
CC = 0
CH = 200
TA = 80
CYA = 40
CL = 10+ It was a little darker than the top shade.
pH = 8.2
Salt = 3600
I know to look at the charts and use poolmath, but does anybody see anything that is way off and if any need working on which should I work on first?
FC = 10
CC = 0
CH = 200
TA = 80
CYA = 40
CL = 10+ It was a little darker than the top shade.
pH = 8.2
Salt = 3600
I know to look at the charts and use poolmath, but does anybody see anything that is way off and if any need working on which should I work on first?