Hey all, looking for some feedback on an issue I'm having with my pressure gauge. It has been reading around 3 psi ever since I replaced the motor end of my pump (same horsepower, just a generic motor). I knew the filters were old so I thought it might just be them causing it.
I ordered a new guage thinking it might also be bad. I installed new cartridge filters along with the gauge. The new guage is still reading 2-3 psi.
The weird thing is I'm getting very good pressure from the returns and my booster pump/cleaner are working fine.
Any ideas on what's going on?
I ordered a new guage thinking it might also be bad. I installed new cartridge filters along with the gauge. The new guage is still reading 2-3 psi.
The weird thing is I'm getting very good pressure from the returns and my booster pump/cleaner are working fine.
Any ideas on what's going on?