Stupid me dumped the stabilizer directly into both skinners and now they are both clogged . What can I do to unclog them. Will the stabilizer eventually dissolve and unclog on its own?
I read an older thread and someone recommend putting the hose into the skimmer and leave it for several hours. I did this in each skimmer and shut the skimmer valve off while the hose ran. This helped build up the pressure and helped dissolve the stabilizer.then I turned each valve on separately and had all the force pulling from that one valve and it worked!!! Flushed the clog right through! Lesson learned don't ever poor directly into the skimmer. Always use a sock in front of the jets to dissolve. In the end it is faster and causes less problems! Thanks for all your advice. I can always count on this website to help me through my pool problems.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!