Finally got my new salt cell in, so therefore I can adjust my CYA now that I can produce chlorine at a sufficient rate. My current chemistries are below:
pH 7.4 - (Can I keep this around 7.2-7.4 range or is that too low?)...I have a little scale buildup and was trying to keep it on the lower side to help prevent that.
TA 40 - (I was going to bump this up to 60 or should I take it to 70?)
CYA 35 - (I was planning on bringing it up to 70 and target 5 for FC.)
CH 140 - (Should I bump this to 200 or 250 beings it's a plaster pool?)...Just bought 12 lbs of Calcium Hardness yesterday
Thanks!
pH 7.4 - (Can I keep this around 7.2-7.4 range or is that too low?)...I have a little scale buildup and was trying to keep it on the lower side to help prevent that.
TA 40 - (I was going to bump this up to 60 or should I take it to 70?)
CYA 35 - (I was planning on bringing it up to 70 and target 5 for FC.)
CH 140 - (Should I bump this to 200 or 250 beings it's a plaster pool?)...Just bought 12 lbs of Calcium Hardness yesterday
Thanks!