How long and at what RPMs should I run my pump to circulate these chemicals throughout the pool? I typically add my liquid chlorine / muriatic acid after the sun gets off my pool, around 6-630pm.
I have an Intelliflo Variable Speed Pump which has the convenient "quick clean" button, which runs the pump for a programmed amount of time and RPMs. I have it set at 2500 RPM for 30 minutes, but am wondering if this is overkill for this purpose. My pool is 30k gallons with pop-outs, so instead of pouring in front of a return, I pour the chemicals into the deep end of the pool (9 feet).
Thanks in advance!
I have an Intelliflo Variable Speed Pump which has the convenient "quick clean" button, which runs the pump for a programmed amount of time and RPMs. I have it set at 2500 RPM for 30 minutes, but am wondering if this is overkill for this purpose. My pool is 30k gallons with pop-outs, so instead of pouring in front of a return, I pour the chemicals into the deep end of the pool (9 feet).
Thanks in advance!